Description

BMR - SB001R

Sway Bar Kit With Bushings, Front, Hollow 35mm

BMR Suspension designed the SB001 sway bar kit for street performance, autocross, and road race applications.

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB001 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 35mm DOM tubing, the SB001 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.

Front Sway Bar Adjustable: Fixed
Front Sway Bar Diameter (in): 1.375 inches
Front Sway Bar Diameter (mm): 35.0 mm
Front Sway Bar Type: Hollow
Mounting Hardware Included: Yes
Position: Front
Quantity: Sold as a kit
Sway Bar Finish: Red powdercoated
Sway Bar Material: Steel

Specifications

Compatibility

  • 1993-1995 Chevrolet Camaro Base V6.-cc
  • 1995-2002 Chevrolet Camaro Base V6.3800cc
  • 1993 Chevrolet Camaro Indianapolis 500 Pace Car V8.-cc
  • 1996-1997 Chevrolet Camaro RS V6.3800cc
  • 1993-2002 Chevrolet Camaro Z28 V8.-cc
  • 1998-2002 Chevrolet Camaro Z28 SS V8.-cc
  • 1993-1995 Pontiac Firebird Base V6.-cc
  • 1995-2002 Pontiac Firebird Base V6.3800cc
  • 1993-2002 Pontiac Firebird Formula V8.-cc
  • 1993-2002 Pontiac Firebird Trans Am V8.-cc
  • 1994 Pontiac Firebird Trans Am GT V8.-cc

BMR - SB001R

Sway Bar Kit With Bushings, Front, Hollow 35mm

BMR Suspension designed the SB001 sway bar kit for street performance, autocross, and road race applications.

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB001 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 35mm DOM tubing, the SB001 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.

Front Sway Bar Adjustable: Fixed
Front Sway Bar Diameter (in): 1.375 inches
Front Sway Bar Diameter (mm): 35.0 mm
Front Sway Bar Type: Hollow
Mounting Hardware Included: Yes
Position: Front
Quantity: Sold as a kit
Sway Bar Finish: Red powdercoated
Sway Bar Material: Steel

  • 1993-1995 Chevrolet Camaro Base V6.-cc
  • 1995-2002 Chevrolet Camaro Base V6.3800cc
  • 1993 Chevrolet Camaro Indianapolis 500 Pace Car V8.-cc
  • 1996-1997 Chevrolet Camaro RS V6.3800cc
  • 1993-2002 Chevrolet Camaro Z28 V8.-cc
  • 1998-2002 Chevrolet Camaro Z28 SS V8.-cc
  • 1993-1995 Pontiac Firebird Base V6.-cc
  • 1995-2002 Pontiac Firebird Base V6.3800cc
  • 1993-2002 Pontiac Firebird Formula V8.-cc
  • 1993-2002 Pontiac Firebird Trans Am V8.-cc
  • 1994 Pontiac Firebird Trans Am GT V8.-cc

Best Sellers