Description

Investing in a larger turbo as well as supporting mods is one of the best power upgrades you could buy. Blouch is the leader in turbo development; they consistently build the best turbo's. The new XT-R line of turbos from Blouch consists of a billet compressor wheel to optimize the aerodynamics of a turbo and increase compressor flow within the same inducer geometry.

All of this combined with Garrett GT turbine and full ball bearing technology to produce a complete bolt-on package that includes stainless steel turbo oil feed line and steel oil drain tube and coolant lines. Adjustable upgrade actuator is standard issue on the 1.5XT-R and is pre-calibrated to operate at 15 PSI unless otherwise specified. The 1.5XT-R has a 56mm turbine to promote better spool up and a better overall turbo.

With the 8cm^2 housing this turbo will spool up slightly faster than the 10cm^2 version of the 1.5XT-R. With the faster spool comes a slight loss in the top end.

Specifications

  • Bearing Type: Ball Bearing
  • Inlet Size: OEM
  • Oil Line Included : Yes
  • Scroll:Single Scroll
  • Exhaust Housing Size: 8cm
  • Rated Horsepower: 480hp
  • Wastegate: Internal
  • Fitment: OEM Upgrade
  • Ported Turbine Housing:Yes
  • Gaskets Included: Yes
  • Cartridge : Garrett

What's Included

  • 1 x Blouch Turbo
  • 1 x Gasket Kit
  • 1 x Oil Feed Line

Compatibility

  • 2001-2007 Subaru WRX

  • 2002-2020 Subaru WRX STi

Investing in a larger turbo as well as supporting mods is one of the best power upgrades you could buy. Blouch is the leader in turbo development; they consistently build the best turbo's. The new XT-R line of turbos from Blouch consists of a billet compressor wheel to optimize the aerodynamics of a turbo and increase compressor flow within the same inducer geometry.

All of this combined with Garrett GT turbine and full ball bearing technology to produce a complete bolt-on package that includes stainless steel turbo oil feed line and steel oil drain tube and coolant lines. Adjustable upgrade actuator is standard issue on the 1.5XT-R and is pre-calibrated to operate at 15 PSI unless otherwise specified. The 1.5XT-R has a 56mm turbine to promote better spool up and a better overall turbo.

With the 8cm^2 housing this turbo will spool up slightly faster than the 10cm^2 version of the 1.5XT-R. With the faster spool comes a slight loss in the top end.

  • Bearing Type: Ball Bearing
  • Inlet Size: OEM
  • Oil Line Included : Yes
  • Scroll:Single Scroll
  • Exhaust Housing Size: 8cm
  • Rated Horsepower: 480hp
  • Wastegate: Internal
  • Fitment: OEM Upgrade
  • Ported Turbine Housing:Yes
  • Gaskets Included: Yes
  • Cartridge : Garrett
  • 1 x Blouch Turbo
  • 1 x Gasket Kit
  • 1 x Oil Feed Line
  • 2001-2007 Subaru WRX

  • 2002-2020 Subaru WRX STi

Best Sellers