Description

The HKS Turbo Kit for the Subaru BRZ/Toyota 86 was designed and engineered to add a significant power bump to the ZN6/ZC6 chassis. The GTIII-RS turbine is the best match for the 2.0L engine with specially designed turbo housing and other components made by HKS.

This kit is available from a stock to tuned engine. It is a 100% bolt-on kit shown to provide ~350 hp with a stock FA20. The kit can be used on it's own, or paired with other upgrades for more power (built motor tested to ~450 hp).

The kit includes all the necessary hard parts for installation. You will need to purchase engine management separately (ECU tune or stand-alone ECU), larger injectors are necessary (440cc or higher recommended), and upgrade the (for 3 BAR boost) MAP pressure sensor.

 

Notes:

  • Reinforced fuel parts such as injectors are required.
  • MAP Pressure sensor is required separately.
  • Engine management tuning/parts are not included in this kit. ECU tune required.
  • Vehicle modification such as oil return port for oil sump is required in order to install this kit.
  • Reinforced clutch is required to avoid slippage of the clutch disk that may occur due to significant torque characteristic change.
  • It is strongly recommended to install an oil cooler to protect the engine.

Specifications

  • Dedicated GTIII-RS turbocharger assembly (internal wastegate)
  • All necessary oil and water lines
  • HKS Power Flow Intake Parts
  • Turbo Manifold (Exhaust Manifold) with cat-less down pipe
  • Necessary heat shielding
  • Gaskets, nuts, bolts and all necessary hardware for installation

What's Included

  • GTIII-RS Turbocharger Assy with an actuator.
  • Oil & Water Piping Parts
  • Air Cleaner, Suction Pipe
  • Front-mounted Intercooler, Piping
  • Exhaust Manifold,
  • For 11001-KT001, CATless Extension
  • For 11001-AT005, Extension with CAT
  • Insulator Cover, Insulator Sheet
  • Gaskets, Brackets, Bolts, etc.

Compatibility

  • 2012-2021 Subaru BRZ
  • 2012-2021 Toyota 86

The HKS Turbo Kit for the Subaru BRZ/Toyota 86 was designed and engineered to add a significant power bump to the ZN6/ZC6 chassis. The GTIII-RS turbine is the best match for the 2.0L engine with specially designed turbo housing and other components made by HKS.

This kit is available from a stock to tuned engine. It is a 100% bolt-on kit shown to provide ~350 hp with a stock FA20. The kit can be used on it's own, or paired with other upgrades for more power (built motor tested to ~450 hp).

The kit includes all the necessary hard parts for installation. You will need to purchase engine management separately (ECU tune or stand-alone ECU), larger injectors are necessary (440cc or higher recommended), and upgrade the (for 3 BAR boost) MAP pressure sensor.

 

Notes:

  • Reinforced fuel parts such as injectors are required.
  • MAP Pressure sensor is required separately.
  • Engine management tuning/parts are not included in this kit. ECU tune required.
  • Vehicle modification such as oil return port for oil sump is required in order to install this kit.
  • Reinforced clutch is required to avoid slippage of the clutch disk that may occur due to significant torque characteristic change.
  • It is strongly recommended to install an oil cooler to protect the engine.
  • Dedicated GTIII-RS turbocharger assembly (internal wastegate)
  • All necessary oil and water lines
  • HKS Power Flow Intake Parts
  • Turbo Manifold (Exhaust Manifold) with cat-less down pipe
  • Necessary heat shielding
  • Gaskets, nuts, bolts and all necessary hardware for installation
  • GTIII-RS Turbocharger Assy with an actuator.
  • Oil & Water Piping Parts
  • Air Cleaner, Suction Pipe
  • Front-mounted Intercooler, Piping
  • Exhaust Manifold,
  • For 11001-KT001, CATless Extension
  • For 11001-AT005, Extension with CAT
  • Insulator Cover, Insulator Sheet
  • Gaskets, Brackets, Bolts, etc.
  • 2012-2021 Subaru BRZ
  • 2012-2021 Toyota 86

Best Sellers