Description

*4WD CAM/CAS SLEEVES* Change camber, caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 to determine the change needed, then install the correct sleeve. To split camber and caster adjustment, rotate sleeve 45. *TIE ROD ADJUSTER SLEEVES* These adjustable hex shaped sleeves replace the round tie rod sleeve to assure ease of adjustment without slippage. Recommended when the existing sleeve is damaged or when replacing a tie rod end for easy adjustment.

Specifications

Compatibility

  • 1999-2004 Chrysler 300M Base V6.3497cc
  • 2003 Chrysler 300M Pro-Am V6.3497cc
  • 2002-2004 Chrysler 300M Special V6.3497cc
  • 2002-2004 Chrysler Concorde Limited V6.3497cc
  • 1998-2004 Chrysler Concorde LX V6.2700cc
  • 1998-2004 Chrysler Concorde LX V6.2736cc
  • 1998-2001 Chrysler Concorde LX V6.3200cc
  • 1998-2001 Chrysler Concorde LXi V6.3200cc
  • 2002-2004 Chrysler Concorde LXi V6.3497cc
  • 1999-2001 Chrysler LHS Base V6.3497cc
  • 1998-2000 Dodge Intrepid Base V6.2700cc
  • 1998-2000 Dodge Intrepid Base V6.2736cc
  • 1999-2001 Dodge Intrepid ES V6.2700cc
  • 1999-2001 Dodge Intrepid ES V6.2736cc
  • 1998-2001 Dodge Intrepid ES V6.3200cc
  • 2002-2004 Dodge Intrepid ES V6.3497cc
  • 2004 Dodge Intrepid Police V6.3497cc
  • 2000-2002 Dodge Intrepid R/T V6.3497cc
  • 2001-2004 Dodge Intrepid SE V6.2700cc
  • 2001-2004 Dodge Intrepid SE V6.2736cc
  • 2001 Dodge Intrepid SE V6.3200cc
  • 2001-2003 Dodge Intrepid SE V6.3497cc
  • 2003-2004 Dodge Intrepid SXT V6.3497cc

*4WD CAM/CAS SLEEVES* Change camber, caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 to determine the change needed, then install the correct sleeve. To split camber and caster adjustment, rotate sleeve 45. *TIE ROD ADJUSTER SLEEVES* These adjustable hex shaped sleeves replace the round tie rod sleeve to assure ease of adjustment without slippage. Recommended when the existing sleeve is damaged or when replacing a tie rod end for easy adjustment.

  • 1999-2004 Chrysler 300M Base V6.3497cc
  • 2003 Chrysler 300M Pro-Am V6.3497cc
  • 2002-2004 Chrysler 300M Special V6.3497cc
  • 2002-2004 Chrysler Concorde Limited V6.3497cc
  • 1998-2004 Chrysler Concorde LX V6.2700cc
  • 1998-2004 Chrysler Concorde LX V6.2736cc
  • 1998-2001 Chrysler Concorde LX V6.3200cc
  • 1998-2001 Chrysler Concorde LXi V6.3200cc
  • 2002-2004 Chrysler Concorde LXi V6.3497cc
  • 1999-2001 Chrysler LHS Base V6.3497cc
  • 1998-2000 Dodge Intrepid Base V6.2700cc
  • 1998-2000 Dodge Intrepid Base V6.2736cc
  • 1999-2001 Dodge Intrepid ES V6.2700cc
  • 1999-2001 Dodge Intrepid ES V6.2736cc
  • 1998-2001 Dodge Intrepid ES V6.3200cc
  • 2002-2004 Dodge Intrepid ES V6.3497cc
  • 2004 Dodge Intrepid Police V6.3497cc
  • 2000-2002 Dodge Intrepid R/T V6.3497cc
  • 2001-2004 Dodge Intrepid SE V6.2700cc
  • 2001-2004 Dodge Intrepid SE V6.2736cc
  • 2001 Dodge Intrepid SE V6.3200cc
  • 2001-2003 Dodge Intrepid SE V6.3497cc
  • 2003-2004 Dodge Intrepid SXT V6.3497cc

Best Sellers