Description

Aeroflow Performance Titanium flat washers are machined from 6AL-4V grade 5 Titanium. These titanium washers are the favoured material when using a titanium fastener due to the attractive property of being a low-density metal, which has a higher tensile strength than many other materials, even in higher temperatures. Given this strength, titanium is remarkably light. When compared to steel in a strength-to-weight ratio, titanium is far superior, as it is as strong as steel but 45% lighter. In fact, titanium has the highest strength-to-weight ratio of all known metals. The pairing of their high strength to weight ratio, excellent resistance to stress corrosion cracking, high corrosion resistance and good fatigue strength make it the best choice to have in your race car.

Specifications

BOOSTED 8888 T6 Turbocharger Specifications
  • Recommended horsepower rating: 1200-1600HP
  • Recommended engine displacement: 3.0L to 7.0L
  • Dual ceramic ball bearing
  • 7075 billet 6 + 6 compressor wheel
  • Ported shroud compressor cover
  • Billet CNC core
  • This is an oil cooled turbocharger
  • Speed sensor port included in compressor cover (Speed sensor sold separately, AF8050-1010)
  • External wastegate sold separately
  • Inlet flange gasket, turbo drain gasket and -4AN turbo oil feed fitting with restrictor included in turbo kit. (Warranty VOID if not used)
  • T6 twin entry turbine inlet flange
  • SiMo-nodular cast iron rear housing
  • V-Band turbine outlet flange
  • V-Band compressor outlet flange or cut off v-band to allow a 3" slip on fit
  • 1/4" NPT to -4AN oil feed fitting with in-built restrictor attached to a 38mm 2-bolt oil feed plate with M8 x 1.25mm thread size
  • 50.80mm bolt centre turbo drain flange with M8 x 1.25mm thread size
  • Compressor Specifications

  • Inducer: 88mm
  • Exducer: 117.36mm
  • Extended Tip: 124.4mm
  • Compressor Inlet: 5.5" slip fit
  • Compressor Outlet: V-Band (AF8080-1025) or 3" slip fit
  • Turbine Specifications

  • Inducer: 95.71mm
  • Exducer: 88mm
  • A/R: 1.32
  • Turbine Inlet Flange: T6
  • Turbine Outlet Flange: V-Band (AF8080-1005)
  • Wastegate

  • External wastegate
  • Compatibility

    • Universal Part

    Aeroflow Performance Titanium flat washers are machined from 6AL-4V grade 5 Titanium. These titanium washers are the favoured material when using a titanium fastener due to the attractive property of being a low-density metal, which has a higher tensile strength than many other materials, even in higher temperatures. Given this strength, titanium is remarkably light. When compared to steel in a strength-to-weight ratio, titanium is far superior, as it is as strong as steel but 45% lighter. In fact, titanium has the highest strength-to-weight ratio of all known metals. The pairing of their high strength to weight ratio, excellent resistance to stress corrosion cracking, high corrosion resistance and good fatigue strength make it the best choice to have in your race car.

    • Universal Part

    Best Sellers