Description

DBA’s Street Performance (SP) brake pads have been designed for drivers seeking improved braking performance over traditional O.E. brake pads. DBA Street Performance is the next step up for all vehicles, developed to provide an effective friction response to pedal application and offer low wear and dust minimisation.

The SP range is recommended for street performance vehicles, 4WD’s and SUV’s and light commercial/trade vehicles.

DBA Street Performance part numbers are denoted by the suffix (SP).

DBA’s range of Performance brake pads have been designed at the forefront of technology and quality standards. DBA has utilised a range of cutting edge features including:

1. Chamfer – Reduces noise, vibration and harshness*
2. Slot – Facilitate temperature stability
3. Premium Quality Shim – Dual layer elastomeric coated shim
4. Scorching Process (TSP) – Raises cold friction effectiveness and reduces bedding-in time
5. Backing Plate – G3131 steel – dimensionally stable and wear resistant
6. Electronic Wear Sensor – OE replacement wear sensor**

Note: Brake Pad / Calliper Hardware included where applicable.
**Electronic wear sensors included where applicable
**Where applicable

All DBA Performance brake pads are scorched on the friction surface to improve the bedding in process and minimise the onset of green fade typically experienced with new pads. Thermal Stability Profiling (TSP), a process unique to DBA, increases cold friction effectiveness and reduces bedding-in time.

The Performance pads include chamfers where required to reduce unwanted noise, vibration and harshness under braking while the centre slot facilitates temperature stability. DBA’s brake pad backing plates are made from high quality steel that is resistant to wear.

DBA also uses high quality European made, triple layer shims to enhance the pad noise dampening characteristics (included in all products).

Of course, these pads are asbestos free with no other nasty materials while at the same time keeping dust to a minimum and are gentle on wheels, with no sticky goo to scrub off.

As with all DBA products, the Performance pad range is backed up with full technical support both online and in the field.

Specifications

  • Upgrade from your OE brake pads for improved bite and friction
  • F-F Class Friction
  • Average of 0.35mu across low and high temperatures
  • Great for street performance vehicles, 4WDs, and SUVs
  • Suits light commercial vehicles
  • Pad Overall Length (mm): 126.8
  • Pad Overall Height (mm): 47.9
  • Pad Thickness (mm): 16.6

Compatibility

Suits vehicles fitted with 316mm Front rotors please ensure you measure prior to ordering.

Some vehicles equipped with this brake pad / rotor size combo

  • 2013 - 2018 Subaru Forrester SJ 
  • 2004 - 2009 Subaru Liberty
  • 2014+ Aubaru Levorg
  • 2003-2020 Subaru Outback BP / BR / BS
  • 2006-2007 Subaru Tribeca
  • 2014 + Subaru WRX V1

 

  

 

DBA’s Street Performance (SP) brake pads have been designed for drivers seeking improved braking performance over traditional O.E. brake pads. DBA Street Performance is the next step up for all vehicles, developed to provide an effective friction response to pedal application and offer low wear and dust minimisation.

The SP range is recommended for street performance vehicles, 4WD’s and SUV’s and light commercial/trade vehicles.

DBA Street Performance part numbers are denoted by the suffix (SP).

DBA’s range of Performance brake pads have been designed at the forefront of technology and quality standards. DBA has utilised a range of cutting edge features including:

1. Chamfer – Reduces noise, vibration and harshness*
2. Slot – Facilitate temperature stability
3. Premium Quality Shim – Dual layer elastomeric coated shim
4. Scorching Process (TSP) – Raises cold friction effectiveness and reduces bedding-in time
5. Backing Plate – G3131 steel – dimensionally stable and wear resistant
6. Electronic Wear Sensor – OE replacement wear sensor**

Note: Brake Pad / Calliper Hardware included where applicable.
**Electronic wear sensors included where applicable
**Where applicable

All DBA Performance brake pads are scorched on the friction surface to improve the bedding in process and minimise the onset of green fade typically experienced with new pads. Thermal Stability Profiling (TSP), a process unique to DBA, increases cold friction effectiveness and reduces bedding-in time.

The Performance pads include chamfers where required to reduce unwanted noise, vibration and harshness under braking while the centre slot facilitates temperature stability. DBA’s brake pad backing plates are made from high quality steel that is resistant to wear.

DBA also uses high quality European made, triple layer shims to enhance the pad noise dampening characteristics (included in all products).

Of course, these pads are asbestos free with no other nasty materials while at the same time keeping dust to a minimum and are gentle on wheels, with no sticky goo to scrub off.

As with all DBA products, the Performance pad range is backed up with full technical support both online and in the field.

  • Upgrade from your OE brake pads for improved bite and friction
  • F-F Class Friction
  • Average of 0.35mu across low and high temperatures
  • Great for street performance vehicles, 4WDs, and SUVs
  • Suits light commercial vehicles
  • Pad Overall Length (mm): 126.8
  • Pad Overall Height (mm): 47.9
  • Pad Thickness (mm): 16.6

Suits vehicles fitted with 316mm Front rotors please ensure you measure prior to ordering.

Some vehicles equipped with this brake pad / rotor size combo

  • 2013 - 2018 Subaru Forrester SJ 
  • 2004 - 2009 Subaru Liberty
  • 2014+ Aubaru Levorg
  • 2003-2020 Subaru Outback BP / BR / BS
  • 2006-2007 Subaru Tribeca
  • 2014 + Subaru WRX V1

 

  

 

Best Sellers