Description

The world’s first universal-fit, automotive Electric Water Pump goes one better with the EWP®150. Suitable for all makes and models – will excel on large six-cylinder engines, V8 engines, heavy duty 4WDs and most engines over 400 HP.

Muscle up your engine cooling system with the Davies Craig EWP® 150 alloy Electric Water Pump. Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat.

The compact EWP®150 alloy unit is manufactured with -AN16 (12) internal inlet and outlet threads for neat, tight screw-in fitting applications.
This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance accessory increases power to your vehicle’s drive wheels and improves coolant temperature control.

Specifications

  • Voltage - 12 Volt Pump
  • Operating voltage - 3V DC to 15V DC
  • Maximum current - 10A @ 13V
  • Flow rate -  (max) 150 L/min (39.63 US gal/min) @ 13V DC
  • Operating temp. -  -40° to 130°C  (-40° to 266°F)
  • Pump design - Clockwise centrifugal with volute chamber
  • Pump weight - 1,170 grams (2.6 lb)
  • Pump material - Aluminium (Powder Coated)
  • Burst pressure - 500 kPa (72.5 psi)
  • Seal - Ceramic face seal
  • Self Priming - No, none of our pumps are self-priming
  • Fits hose sizes 35mm to 51mm (1⅜” to 2”) Inlet & Outlet -16AN (12)

Push-On fitting Size :

  • EWP Inlet & Outlet 38mm
  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm

What's Included

  • EWP150 Pump 12V x 1
  • Hardware Bag x 1
  • Rubber Sleeve 3mm x 2
  • Hose Clamp x 2
  • EWP Basic Pump Loom x 1
  • EWP Universal Instructions x 1

Compatibility

  • Universal Part

The world’s first universal-fit, automotive Electric Water Pump goes one better with the EWP®150. Suitable for all makes and models – will excel on large six-cylinder engines, V8 engines, heavy duty 4WDs and most engines over 400 HP.

Muscle up your engine cooling system with the Davies Craig EWP® 150 alloy Electric Water Pump. Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat.

The compact EWP®150 alloy unit is manufactured with -AN16 (12) internal inlet and outlet threads for neat, tight screw-in fitting applications.
This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance accessory increases power to your vehicle’s drive wheels and improves coolant temperature control.

Combined with an LCD EWP®/Fan Digital Controller (Sold separately Part #8002 or combo #8970) will manage both the EWP® and Thermatic® fan operation. The Digital Controller will vary the speed of the EWP® in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic® Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life. The EWP®80 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.

The world’s most advanced total engine cooling management system:

  • universal fit
  • more power
  • more cooling
  • increase fuel efficiency
  • extend engine life
  • world-leading technology
  • Voltage - 12 Volt Pump
  • Operating voltage - 3V DC to 15V DC
  • Maximum current - 10A @ 13V
  • Flow rate -  (max) 150 L/min (39.63 US gal/min) @ 13V DC
  • Operating temp. -  -40° to 130°C  (-40° to 266°F)
  • Pump design - Clockwise centrifugal with volute chamber
  • Pump weight - 1,170 grams (2.6 lb)
  • Pump material - Aluminium (Powder Coated)
  • Burst pressure - 500 kPa (72.5 psi)
  • Seal - Ceramic face seal
  • Self Priming - No, none of our pumps are self-priming
  • Fits hose sizes 35mm to 51mm (1⅜” to 2”) Inlet & Outlet -16AN (12)

Push-On fitting Size :

  • EWP Inlet & Outlet 38mm
  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm
  • EWP150 Pump 12V x 1
  • Hardware Bag x 1
  • Rubber Sleeve 3mm x 2
  • Hose Clamp x 2
  • EWP Basic Pump Loom x 1
  • EWP Universal Instructions x 1
  • Universal Part

Best Sellers