Fox - 885-08-065-4

PERFORMANCE ELITE SERIES 2.5 RC2 SHOCK (PAIR) - ADJUSTABLE

Direct bolt in replacement for 2 rear shocks. Fits 4 seat models.

Build on our race-proven 2.5” shock platform, the Performance Elite Series 2.5 Podium RC2 shocks are designed to be stronger, lighter and make your RZR XP1000 handle better in every way. First, we addressed bottom-out control without sacrificing ride comfort. We switched to a true dual-stage spring set with adjustable crossover rings to keep a softer ride through the initial part of the stroke for comfort and traction, then run on the stiffer second stage to support the car as it pushes deeper in the travel to absorb big hits and landing off whoops. We combined the dual-stage springs with a bottom-out cup in the top of the shock that engages a second piston at the last few 25% of the suspension travel to dramatically increase the compression damping to catch the vehicle before it can slam through the last of the travel. The second area of focus was improving the handing dynamics of the XP1000. The shocks were tuned for less body roll in sweeping corners and rapid direction changes. This gives the car a planted feeling to inspire confidence and improves traction. The RC2 adjusters on the piggy back reservoirs have wide-range high- and low-speed compression settings to dial in the exact amount of compression control for the specific loads you are carrying, and to compensate for how that load is balanced front to rear in the car. Wide range adjustable rebound settings give you the control to work with a broad range of spring rates and preload settings to maximize tire grip by keeping your wheels firmly planted on the dirt. Beyond the extra capability you gain after bolting on a set of FOX Performance Elite Series 2.5 Podium RC2 shocks, you’ll have peace of mind knowing that they’re ruggedly built with hard-anodized aluminum bodies and reservoirs that resist corrosion, 7/8-inch hard chromed shafts for smooth operation and longer seal life, and are fully rebuildable if you ever damage a part or want to get them custom-valved for a specific riding application.

• Adjustable Dual-Speed Compression (DSC)
• Adjustable wide range rebound
• Adjustable spring preload
• Adjustable spring crossover
• Bottom-out control
• Remote reservoir
• Custom spring packages for Race, Desert and Dune conditions
• 7/8” hard-chromed induction hardened shaft
• 3.0” ID lightweight dual rate race springs with crossover
• 5/8” ID Hi Flow remote reservoir hose
• PTFE-lined spherical bearings for smooth durable movement
• Kashima-coated 2.5” bore body and 2.25” bore reservoir