Description

A heavy duty winch plate that allows you to securely fasten a winch to your Ford Ranger T6's chassis, behind the original bumper. This easy to install plate supports most popular winch brands and sizes.

  • Specifically designed for the Ford Ranger T6.
  • Supports all popular winch sizes (8 000lbs (3.6t) - 10 000lbs (4.5t)).
  • Bolts directly to vehicle chassis with supplied hardware.
  • Fitted behind the original factory bumper, the winch plate and winch is hidden.
  • Allows access to the winch free spool lever.
  • Manufactured from 8mm Carbon Steel for strength and black powder coated for added durability.
  • A small section of the original bumper needs to be trimmed to allow for the roller fairlead to be exposed.

*Please Note: This Winch Plate does not work with Ford Ranger T6 models with Tech Pak Adaptive Cruise Control and Wildtrak models.

Instructions for WPFR001

Specifications

  • PX2 Ranger and Tech Pack Equipped Vehicles:
  • Redrill the fairlead mounting holes about 20mm lower down so No cutting of the bumper is required.
  • Slightly bend out the vertical plate on the motor side so it clears the end cap on the motor.
  • A new bracket will be needed to be made up and bolted to the cradle for the radar unit on tech pack equipped vehicles.
  • The unit is made to originally suit the PX1 Ranger. Front Runner the company that produces these cradles have Not made a new one for the PX2 but with the mods above our customers have made it compatible.
  • PX2 Ranger and Tech Pack Equipped Vehicles.
  • Redrill the fairlead mounting holes about 20mm lower down so No cutting of the bumper is required.
  • Slightly bend out the vertical plate on the motor side so it clears the end cap on the motor.
  • A new bracket will be needed to be made up and bolted to the cradle for the radar unit on tech pack equipped vehicles.
  • The unit is made to originally suit the PX1 Ranger. Front Runner the company that produces these cradles have Not made a new one for the PX2 but with the mods above our customers have made it compatible.
  • Bolts directly to vehicle chassis with supplied hardware.
  • Fitted behind the original factory bumper, the winch plate and winch is hidden.
  • Allows access to the winch free spool lever.
  • Manufactured from 8mm Carbon Steel for strength and black powder coated for added durability.
  • A small section of the original bumper needs to be trimmed to allow for the roller fairlead to be exposed.
  • There are No ADRs applicable to in bumper winch mounts. These cradles allow for proper function of airbags as per factory.

What's Included

  • Consists of:
    • 1 x Winch Plate 
    • Hardware Kit
    • Fitting Instructions
    • Materials used: Black powder coated 8mm mild steel
    • Product Dimensions:210mm (8.3") L x 971mm (38.2") W x  195mm (7.7") H
    • Weight:17.6Kg

Compatibility

  • Ford Ranger

A heavy duty winch plate that allows you to securely fasten a winch to your Ford Ranger T6's chassis, behind the original bumper. This easy to install plate supports most popular winch brands and sizes.

  • Specifically designed for the Ford Ranger T6.
  • Supports all popular winch sizes (8 000lbs (3.6t) - 10 000lbs (4.5t)).
  • Bolts directly to vehicle chassis with supplied hardware.
  • Fitted behind the original factory bumper, the winch plate and winch is hidden.
  • Allows access to the winch free spool lever.
  • Manufactured from 8mm Carbon Steel for strength and black powder coated for added durability.
  • A small section of the original bumper needs to be trimmed to allow for the roller fairlead to be exposed.

*Please Note: This Winch Plate does not work with Ford Ranger T6 models with Tech Pak Adaptive Cruise Control and Wildtrak models.

Instructions for WPFR001

  • PX2 Ranger and Tech Pack Equipped Vehicles:
  • Redrill the fairlead mounting holes about 20mm lower down so No cutting of the bumper is required.
  • Slightly bend out the vertical plate on the motor side so it clears the end cap on the motor.
  • A new bracket will be needed to be made up and bolted to the cradle for the radar unit on tech pack equipped vehicles.
  • The unit is made to originally suit the PX1 Ranger. Front Runner the company that produces these cradles have Not made a new one for the PX2 but with the mods above our customers have made it compatible.
  • PX2 Ranger and Tech Pack Equipped Vehicles.
  • Redrill the fairlead mounting holes about 20mm lower down so No cutting of the bumper is required.
  • Slightly bend out the vertical plate on the motor side so it clears the end cap on the motor.
  • A new bracket will be needed to be made up and bolted to the cradle for the radar unit on tech pack equipped vehicles.
  • The unit is made to originally suit the PX1 Ranger. Front Runner the company that produces these cradles have Not made a new one for the PX2 but with the mods above our customers have made it compatible.
  • Bolts directly to vehicle chassis with supplied hardware.
  • Fitted behind the original factory bumper, the winch plate and winch is hidden.
  • Allows access to the winch free spool lever.
  • Manufactured from 8mm Carbon Steel for strength and black powder coated for added durability.
  • A small section of the original bumper needs to be trimmed to allow for the roller fairlead to be exposed.
  • There are No ADRs applicable to in bumper winch mounts. These cradles allow for proper function of airbags as per factory.
  • Consists of:
    • 1 x Winch Plate 
    • Hardware Kit
    • Fitting Instructions
    • Materials used: Black powder coated 8mm mild steel
    • Product Dimensions:210mm (8.3") L x 971mm (38.2") W x  195mm (7.7") H
    • Weight:17.6Kg
  • Ford Ranger

Best Sellers