Description

Product Notes:

  • Hot Side Intercooler Pipe, and Air Intake Pipe modifications will be required.

Specifications

  • Bearing Type: Ball Bearing
  • Cooling System: Oil & Water Cooled
  • Horsepower: 275 - 320awkw with supporting modifications.
  • Application: Nissan RB20DET / RB25DET (Skyline, Stagea, Cefiro)
  • Actuator: GCG Billet 14.7psi (supplied with additional 5psi spring to bring the minimum boost preset to 19psi if required)
  • New G Series compressor wheel aerodynamics
  • Fully machined speed sensor and pressure ports
  • Oil restrictor and water fittings included with purchase
  • One piece center housing and backplate for increased durability
  • 4 water jacket ports for customizable installation
  • Mar-M turbine wheel material rated up to 1050° C | 1922° F
  • Turbine Housing - 0.73a/r Turbine Housing allows for good mid range and top end power on modified RB20DET engines, and even greater response and power on RB25DET engines.
  • Factory Turbo Orientation - Oil Feed, Oil Drain and Water Lines purchase XTRFKGT-RBLM , and the orientation is in an identical position to the factory setup, allowing for easy re-fitment.
  • Factory Turbo Position - These Turbochargers still look very similar to a factory unit, and utilize the factory manifold, and exhaust system.
  • Ultimate Boost Control - GCG Billet Actuator with spring options allow for a number of different preset boost combinations.
  • Supporting Re-Fitment Parts - Exhaust studs, locking nuts for the dump pipe, and a complete turbocharger gasket kit is included.

Compatibility

  • Nissan Skyline RB20 RB25

Product Notes:

  • Hot Side Intercooler Pipe, and Air Intake Pipe modifications will be required.
  • Bearing Type: Ball Bearing
  • Cooling System: Oil & Water Cooled
  • Horsepower: 275 - 320awkw with supporting modifications.
  • Application: Nissan RB20DET / RB25DET (Skyline, Stagea, Cefiro)
  • Actuator: GCG Billet 14.7psi (supplied with additional 5psi spring to bring the minimum boost preset to 19psi if required)
  • New G Series compressor wheel aerodynamics
  • Fully machined speed sensor and pressure ports
  • Oil restrictor and water fittings included with purchase
  • One piece center housing and backplate for increased durability
  • 4 water jacket ports for customizable installation
  • Mar-M turbine wheel material rated up to 1050° C | 1922° F
  • Turbine Housing - 0.73a/r Turbine Housing allows for good mid range and top end power on modified RB20DET engines, and even greater response and power on RB25DET engines.
  • Factory Turbo Orientation - Oil Feed, Oil Drain and Water Lines purchase XTRFKGT-RBLM , and the orientation is in an identical position to the factory setup, allowing for easy re-fitment.
  • Factory Turbo Position - These Turbochargers still look very similar to a factory unit, and utilize the factory manifold, and exhaust system.
  • Ultimate Boost Control - GCG Billet Actuator with spring options allow for a number of different preset boost combinations.
  • Supporting Re-Fitment Parts - Exhaust studs, locking nuts for the dump pipe, and a complete turbocharger gasket kit is included.
  • Nissan Skyline RB20 RB25

Best Sellers