From Garrett Motion comes the most powerful mid-frame turbo on the market, designed to exacting specifications to please die hard race enthusiasts with unprecedented power in such a small package.

Designed specifically for 2.0L to 5.5L engine displacements, the G35-1050 turbocharger can produce up to 1050 horsepower. Highly efficient, the G35-1050 Series from Garrett Motion will outflow all comparable products on the market.

No strangers to pushing the envelope when it comes to performance, the G35-1050 Series features an all-new compressor and turbo aero combined with high temperature resistance materials to offer huge performance gains in a durable, reliable product.

Compressor Aero

Forged fully-machined compressor wheel and new aerodynamics increase maximum horsepower output and boost response. The CFD (computational fluid dynamics) engineered compressor wheel increases air flow up to 15% for 60mm and 30% for 67mm with 79-80% efficiency. (Compared to GTX GenII)

Available in standard rotation and reverse rotation options for enthusiasts that want the perfect twin turbo installation or a single reverse rotation turbo for applications with installation restrictions.

Speed Sensor

The compressor housing features a fully machined ported shroud to help reduce compressor surge. A fully machined speed sensor port provides enthusiasts the option to add the new G Series speed sensor to measure turbocharger shaft speed, a key factor in determining ideal operating conditions.

The new speed sensor is easy to install and does not need to be adjusted for length like previous sensors. Simply remove and plug, then insert the speed sensor and tighten the bolt. The new speed sensor is sold separately and is not compatible with GT and GTX sensors due to the new design and sizing.
The addition of an o-ring between the compressor housing and backplate reduces the possibility of boost pressure leakage.

Center Housing

A new one-piece center housing and backplate increase durability and product safety by reducing the number of failure points associated with the turbocharger. The center housing to turbine housing v-band connection allows for 360 degree orientation when installing with Garrett® non-wastegated turbine housings.

Water Jackets

Four large water jacket ports increase cooling capacity and allow enthusiasts to customize water line routing to help improve the installation process. The turbocharger comes with two -6AN water fittings and two plugs.

Oil Passage

A single stage oil passage directs pressurized oil to the new oil cavity ensuring proper bearing lubrication at both sides of the cartridge.

Each turbocharger includes (1) -4AN oil restrictor fitting with a 1mm orifice to provide the turbo with the recommended 40psi of oil pressure.

Rotating Group – Twin Piston Rings

A shorter bearing cartridge allows us to incorporate twin piston rings on both sides of the shaft wheel assembly. This will reduce the likeliness of oil leakage at the seals from the center housing to the compressor and or turbine stage.

Turbine Wheel Aero

The turbine wheel features all new aerodynamics to improve flow and boost response. The new turbine wheel is made of Mar-M super alloy and is capable of handling exhaust gas temperatures up to 1050 degrees C.
The new turbine wheel flows 15-20% more than GTX and has peak efficiency of 74%.

Turbine Housings

Internally wastegated housings are compact, efficient, and designed with maximum bypass port size to reduce boost creep and provide better boost control.
Turbine housings are available in a variety of wastegated and non-wastegated, open volute, T25 and Vband configurations so be sure to order the correct part for your application.

Whats left to do once it's fitted?

• Air Inlet Hose/Pipe - The factory turbocharger has a 3.0-inch Inlet, the G35-1050 has a 4.0-inch Inlet. A simple reducer hose, or a little fabrication may be required to adapt to your existing setup. Alternatively, you could purchase a Process West or Plazmaman 4" intake system, specific for the FG Falcon 4" Inlet Upgrades
• Air Outlet Hose/Pipe - The factory turbocharger has a 2.0-inch Outlet, the G35-1050 has a 2.5-inch Outlet. Again, this can be as simple as a reducer hose, or some slight fabrication to make it all go together.

That's It! - Extremely simple to re-fit, with minimal modifications to adapt to your existing setup!