Description

REPLACE HEAT WITH HORSEPOWER!

The Garrett® direct fit Ford Focus ST performance charge air cooler boasts a 115% larger core that helps
reduce intake manifold temperatures by an average of 11degC based on OBD II data. Optimized end tanks
improve air flow through the core. This performance intercooler showed an increase of up to 25 HP (19 kW)
and 9 lb-ft (12 N-m) of torque compared to OE during back to back dyno comparisons in a wind tunnel which
generates air velocity that matches vehicle speed. During testing the heat saturation point increased from 4
dyno pulls to 8 dyno pulls.
This direct fit performance intercooler installs in 1.5 hours and can support up to 670 HP (499 kW) all while
reusing the stock bolts, hoses, and clamps. This intercooler also features an integrated drain plug to allow
removal of condensation buildup.

Application: 2013 - 2018 Ford Focus ST 2.0L
Supports up to 670 HP (499 kW)

Part Number: G880736-6001

Specifications

  • Supports up to 670 HP (499 kW)
  • 115% larger core than stock
  • Installs in stock location
  • Up to 25 HP (19 kW) and 9 lb-ft (12 N-m) of torque
  • Average 11degC reduction in intake temperature based on OBD II data
  • Integrated drain plug to evacuate condensation
  • Cast aluminum end tanks
  • Advanced offset fin design
  • Bar-and-plate construction
  • Core Size: 668mm x 109mm x 198mm

Compatibility

  • Ford Focus ST 2.0 2013-2018

REPLACE HEAT WITH HORSEPOWER!

The Garrett® direct fit Ford Focus ST performance charge air cooler boasts a 115% larger core that helps
reduce intake manifold temperatures by an average of 11degC based on OBD II data. Optimized end tanks
improve air flow through the core. This performance intercooler showed an increase of up to 25 HP (19 kW)
and 9 lb-ft (12 N-m) of torque compared to OE during back to back dyno comparisons in a wind tunnel which
generates air velocity that matches vehicle speed. During testing the heat saturation point increased from 4
dyno pulls to 8 dyno pulls.
This direct fit performance intercooler installs in 1.5 hours and can support up to 670 HP (499 kW) all while
reusing the stock bolts, hoses, and clamps. This intercooler also features an integrated drain plug to allow
removal of condensation buildup.

Application: 2013 - 2018 Ford Focus ST 2.0L
Supports up to 670 HP (499 kW)

Part Number: G880736-6001

  • Supports up to 670 HP (499 kW)
  • 115% larger core than stock
  • Installs in stock location
  • Up to 25 HP (19 kW) and 9 lb-ft (12 N-m) of torque
  • Average 11degC reduction in intake temperature based on OBD II data
  • Integrated drain plug to evacuate condensation
  • Cast aluminum end tanks
  • Advanced offset fin design
  • Bar-and-plate construction
  • Core Size: 668mm x 109mm x 198mm
  • Ford Focus ST 2.0 2013-2018

Best Sellers