Description

Specifically designed for use in unlimited racing applications equipped with an external, dry timing-belt, cam drive system, where the bracket must be remote mounted to a front motor plate or some mounting surface other than a designated cam cover mounting flange. (i.e.: Early model Small & Big Block Fords, etc.)

Features

  • Includes 3 wire hall-effect sensor, all billet constructed, anodized, aluminum bracket & stainless T-Nut, better than grade 8 mounting hardware, mating connector, and SS ¼”-20 “flying magnet” screw w/ high-temp, rare-earth magnet
  • Unique t-nut and bracket design allows for complete sensor adjustment from the outside of the bracket with a single jam nut
  • Designed to provide a plug-&-play cam position signal to Holley EFI systems yet compatible with any EFI system which can read a digital, square-wave cam input signal
  • Bracket assembly can be mounted at any angle about the perimeter of the cam pulley to clear various front accessory drive arrangements

Specifications

ApplicationUniversal
Bolt Hole Quantity2
BrandHolley EFI
ColourBlack
Emission Code4
Grade TypePerformance
Mounting Bracket IncludedYes
Mounting Hardware IncludedYes
Mounting TypeBolt On
Product TypeHall Effect Cam Sync
Sensor TypeHall Effect
Wire Quantity3

Compatibility

  • Universal Part

Specifically designed for use in unlimited racing applications equipped with an external, dry timing-belt, cam drive system, where the bracket must be remote mounted to a front motor plate or some mounting surface other than a designated cam cover mounting flange. (i.e.: Early model Small & Big Block Fords, etc.)

Features

  • Includes 3 wire hall-effect sensor, all billet constructed, anodized, aluminum bracket & stainless T-Nut, better than grade 8 mounting hardware, mating connector, and SS ¼”-20 “flying magnet” screw w/ high-temp, rare-earth magnet
  • Unique t-nut and bracket design allows for complete sensor adjustment from the outside of the bracket with a single jam nut
  • Designed to provide a plug-&-play cam position signal to Holley EFI systems yet compatible with any EFI system which can read a digital, square-wave cam input signal
  • Bracket assembly can be mounted at any angle about the perimeter of the cam pulley to clear various front accessory drive arrangements
ApplicationUniversal
Bolt Hole Quantity2
BrandHolley EFI
ColourBlack
Emission Code4
Grade TypePerformance
Mounting Bracket IncludedYes
Mounting Hardware IncludedYes
Mounting TypeBolt On
Product TypeHall Effect Cam Sync
Sensor TypeHall Effect
Wire Quantity3
  • Universal Part

Best Sellers