Description

The VQ35HR is the ultimate evolution of the VQ35 series. The HR was built to be driven at the limit, but over a decade of daily driving and banging the limiter takes its toll.

As the VQ35HR ages, it produces more and more blow-by, which makes its way back through the intake system and into the cylinders. More blow-by equals a higher chance of detonation, and the high-revving, high compression HR can't afford more risk.

That's why Mishimoto has developed a baffled oil catch can for your VQ35HR-powered 2007-2009 Nissan 350Z or Infiniti. Our complete kit utilizes two 6061-aluminum catch cans that mount in line with the VQ35HR's PCV and CCV systems for protection from idle to wide-open throttle. Blow-by is routed away from the intake and into our catch cans using direct-fit, chemical-resistant lines and CNC-machined aluminum fittings. Our cans are suspended in the engine bay by sturdy 3mm-thick steel brackets that can withstand everything from dirt drops to potholes without flinching. Inside the catch cans, air diverters and a baffle help condense oil, fuel, and water, while a 50-micron bronze filter further cleans crankcase gases before returning them to your intake.

Like all our 350Z products, this baffled oil catch can kit for the 2007-2009 350Z VQ35HR is backed by our Mishimoto Lifetime Warranty for a lifetime of protection. So, whether you're hitting the track or the street, protect your VQ35HR with this Mishimoto baffled oil catch can kit.

Note: After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.

Product Features

  • Direct fit for 2007-2009 Nissan 350Z with VQ35HR
  • Dual-can system captures blow-by from both CCV and PCV systems
  • Sturdy 3mm-thick steel brackets withstand rough roads and track abuse
  • Modular brackets fit with stock engine cover and make servicing catch cans easy
  • Includes pre-molded, stock-style hoses for simplified install
  • Defends intake system, and essential engine components from oil blow-by
  • Helps maintain proper octane levels to reduce risk of detonation
  • CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can
  • Includes aluminum T-connector for use with aftermarket intakes
  • Filters and cans are fully serviceable
  • Mishimoto Lifetime Warranty

Specifications

  • Material: 6061 Aluminum
  • Install Torque Specs: 22 in-lbs (2.5N*M)

Recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M). Color: Black

What's Included

  • (2) Black Anodized Aluminum Baffled Oil Catch Cans
  • (4) Application-Specific Mounting Brackets
  • (5) Direct-Fit Hoses, Black
  • (1) Aluminum T-Fitting
  • (11) Worm Gear Clamps
  • (4) CNC-machined Aluminum Barbed Fittings
  • Mounting Hardware
  • Mishimoto Lifetime Warranty

Compatibility

  • 2008 - 2012 INFINITI EX35 Base
  • 2008 - 2012 INFINITI EX35 Journey
  • 2009 - 2012 INFINITI FX35 Base
  • 2007 - 2008 INFINITI G35 Base
  • 2007 - 2008 INFINITI G35 Journey
  • 2007 - 2008 INFINITI G35 Sport
  • 2007 - 2008 INFINITI G35 X
  • 2008 INFINITI G35 X Sport
  • 2009 - 2010 INFINITI M35 Base
  • 2009 - 2010 INFINITI M35 X
  • 2012 - 2013 INFINITI M35h Base
  • 2007 - 2008 Nissan 350Z Base
  • 2007 - 2009 Nissan 350Z Enthusiast
  • 2007 - 2009 Nissan 350Z Grand Touring
  • 2007 - 2008 Nissan 350Z Nismo
  • 2007 - 2009 Nissan 350Z Touring

The VQ35HR is the ultimate evolution of the VQ35 series. The HR was built to be driven at the limit, but over a decade of daily driving and banging the limiter takes its toll.

As the VQ35HR ages, it produces more and more blow-by, which makes its way back through the intake system and into the cylinders. More blow-by equals a higher chance of detonation, and the high-revving, high compression HR can't afford more risk.

That's why Mishimoto has developed a baffled oil catch can for your VQ35HR-powered 2007-2009 Nissan 350Z or Infiniti. Our complete kit utilizes two 6061-aluminum catch cans that mount in line with the VQ35HR's PCV and CCV systems for protection from idle to wide-open throttle. Blow-by is routed away from the intake and into our catch cans using direct-fit, chemical-resistant lines and CNC-machined aluminum fittings. Our cans are suspended in the engine bay by sturdy 3mm-thick steel brackets that can withstand everything from dirt drops to potholes without flinching. Inside the catch cans, air diverters and a baffle help condense oil, fuel, and water, while a 50-micron bronze filter further cleans crankcase gases before returning them to your intake.

Like all our 350Z products, this baffled oil catch can kit for the 2007-2009 350Z VQ35HR is backed by our Mishimoto Lifetime Warranty for a lifetime of protection. So, whether you're hitting the track or the street, protect your VQ35HR with this Mishimoto baffled oil catch can kit.

Note: After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.

Product Features

  • Direct fit for 2007-2009 Nissan 350Z with VQ35HR
  • Dual-can system captures blow-by from both CCV and PCV systems
  • Sturdy 3mm-thick steel brackets withstand rough roads and track abuse
  • Modular brackets fit with stock engine cover and make servicing catch cans easy
  • Includes pre-molded, stock-style hoses for simplified install
  • Defends intake system, and essential engine components from oil blow-by
  • Helps maintain proper octane levels to reduce risk of detonation
  • CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can
  • Includes aluminum T-connector for use with aftermarket intakes
  • Filters and cans are fully serviceable
  • Mishimoto Lifetime Warranty
  • Material: 6061 Aluminum
  • Install Torque Specs: 22 in-lbs (2.5N*M)

Recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M). Color: Black

  • (2) Black Anodized Aluminum Baffled Oil Catch Cans
  • (4) Application-Specific Mounting Brackets
  • (5) Direct-Fit Hoses, Black
  • (1) Aluminum T-Fitting
  • (11) Worm Gear Clamps
  • (4) CNC-machined Aluminum Barbed Fittings
  • Mounting Hardware
  • Mishimoto Lifetime Warranty
  • 2008 - 2012 INFINITI EX35 Base
  • 2008 - 2012 INFINITI EX35 Journey
  • 2009 - 2012 INFINITI FX35 Base
  • 2007 - 2008 INFINITI G35 Base
  • 2007 - 2008 INFINITI G35 Journey
  • 2007 - 2008 INFINITI G35 Sport
  • 2007 - 2008 INFINITI G35 X
  • 2008 INFINITI G35 X Sport
  • 2009 - 2010 INFINITI M35 Base
  • 2009 - 2010 INFINITI M35 X
  • 2012 - 2013 INFINITI M35h Base
  • 2007 - 2008 Nissan 350Z Base
  • 2007 - 2009 Nissan 350Z Enthusiast
  • 2007 - 2009 Nissan 350Z Grand Touring
  • 2007 - 2008 Nissan 350Z Nismo
  • 2007 - 2009 Nissan 350Z Touring

Best Sellers