Description

These cluster mounts suit the Toyota MR2 SW20, both LHD and RHD variants.

This mount is a plug-and-play mount which replaces the factory cluster allowing you to mount your aftermarket dash as cleanly and easily as possible.

Simply remove your OEM cluster, install your mount and wire up your new dash. The surrounding trim then screws back in place in front of the mount to get a clean, OEM look on the finished install.

Allows fitment of the Powertune Digital dash, directly in place of your OEM dash.

We also offer top end Billet Aluminium indicator lights for your dash. The lights are 12mm 12v LEDs with a matte black finish

These mounts are made from ABS plastic similar to most OEM interior trim pieces. We also make sure to overengineer all of our mounts so that even as your 1000hp+ motor shakes the bolts loose on your car your cluster mount will never fail.

Designed and sold for racing use only.

Please note: All cluster mounts are made to order and require a typical 2 weeks lead time from order placement. If you order a dash and cluster together, the dash and cluster will be shipped Separately.

Specifications

You can also add pod mounts to your mount. If you order a 52mm cutout, it will be 52.5+-0.5mm. We can make cutouts in any size, if you would like an alternate sized cutout contact us and we'll see what we can do.

  • 52mm Left Pod +$20
  • 52mm Right Pod +$20
  • 60mm Left Pod +$20
  • 60mm Right Pod +$20

You can also add lights to your mount. The lights that we supply are 12v 12mm LED lights. We will make the cuts for you to mount and will ensure they are perfectly symmetrical.

  • Indicators +$40
  • ABS +$20
  • Battery +$20
  • Death +$20
  • Drive +$20
  • Engine Warning +$20
  • Handbrake +$20
  • High Beam +$20
  • Neutral +$20
  • Low Beam +$20
  • Low Fuel +$20
  • NOS +$20
  • Oil Pressure +$20
  • Park +$20
  • Power +$20
  • Reverse +$20
  • Seatbelt +$20
  • Start +$20
  • Temperature Warning +$20
  • 4x4 +$20

Compatibility

  • 1984 - 2007 Toyota MR2 SW20

These cluster mounts suit the Toyota MR2 SW20, both LHD and RHD variants.

This mount is a plug-and-play mount which replaces the factory cluster allowing you to mount your aftermarket dash as cleanly and easily as possible.

Simply remove your OEM cluster, install your mount and wire up your new dash. The surrounding trim then screws back in place in front of the mount to get a clean, OEM look on the finished install.

Allows fitment of the Powertune Digital dash, directly in place of your OEM dash.

We also offer top end Billet Aluminium indicator lights for your dash. The lights are 12mm 12v LEDs with a matte black finish

These mounts are made from ABS plastic similar to most OEM interior trim pieces. We also make sure to overengineer all of our mounts so that even as your 1000hp+ motor shakes the bolts loose on your car your cluster mount will never fail.

Designed and sold for racing use only.

Please note: All cluster mounts are made to order and require a typical 2 weeks lead time from order placement. If you order a dash and cluster together, the dash and cluster will be shipped Separately.

You can also add pod mounts to your mount. If you order a 52mm cutout, it will be 52.5+-0.5mm. We can make cutouts in any size, if you would like an alternate sized cutout contact us and we'll see what we can do.

  • 52mm Left Pod +$20
  • 52mm Right Pod +$20
  • 60mm Left Pod +$20
  • 60mm Right Pod +$20

You can also add lights to your mount. The lights that we supply are 12v 12mm LED lights. We will make the cuts for you to mount and will ensure they are perfectly symmetrical.

  • Indicators +$40
  • ABS +$20
  • Battery +$20
  • Death +$20
  • Drive +$20
  • Engine Warning +$20
  • Handbrake +$20
  • High Beam +$20
  • Neutral +$20
  • Low Beam +$20
  • Low Fuel +$20
  • NOS +$20
  • Oil Pressure +$20
  • Park +$20
  • Power +$20
  • Reverse +$20
  • Seatbelt +$20
  • Start +$20
  • Temperature Warning +$20
  • 4x4 +$20
  • 1984 - 2007 Toyota MR2 SW20

Best Sellers