Description

The Problem with the standard Nissan radius arm design is that the rear pin style mounting puts a lot of load on the mushroom bushes when the arms flex down.

And this is the main cause of premature failure of the bushes.

The difference between our new design arms over the standard Nissan radius arm is the use of a Toyota-style rear bush.

This change allows increased life from the rear bush when flexing the arms up off-road, by allowing the arm to flex down without the binding found in the pin-style design.

With the arms, we supply the mounting drop boxes that are a straight bolt-in design requiring no cutting and all bolts needed for mounting.

We also supply fitting instructions and all the bushes are pressed into the arms so you donÂ’t have to.

With these arms, you will get the drivability you need and longer life from your bushes. Why not have extra flex as well as good on-road handling?

If you want to push the diff forward to straighten up your coils we offer the Hybrid Radius Arm Spacers.

NOTE: To fit Sway Bar Mounts you will require 85mm sway bar mounts and bushes. If you do not have sway bar mounts or you have 75mm mounts you can purchase the required ones below.

85mm Sway Bar Mount
Sway Bar Bushes to suit 85mm Mounts
  • Manufactured from High Tensile Bisalloy 80/Strenx700 Plate
  • High Tensile Bar Bush Eyes
  • Massive 32mm main Beam thickness for maximum strength
  • Rubber Bushes pre-fitted into arms
  • Laser-cut to precise measurement and caster location
  • Authentic Superior Engineering Logo machined into the side of Arms
  • Factory Sway bar will fit to allow safe on-road handling (see important note)
  • Factory ABS lines will bolt-on. (See important note)
  • RADIUS ARMS are manufactured Suitable For various lifts
  • Sandblasted with rust prevention applied
  • Powder Coated for maximum durability and finish
  • High Tensile Bisalloy 80/Strenx700 Plate will not crack unlike Cast Radius Arms(see image below for example)
  • Sway Bar Adapter plate bracket and bolts have a SA5 Zinc coating for rust prevention
  • Allows vehicle to track correctly on road due to correct caster
  • Maximum Clearance between the Tie Rod and the Radius Arms
  • Factory bushes fit the RADIUS ARMS; we donÂ’t use special sizes Bushes

Specifications

Compatibility

  • Nissan Patrol GQ/GU
The Problem with the standard Nissan radius arm design is that the rear pin style mounting puts a lot of load on the mushroom bushes when the arms flex down.

And this is the main cause of premature failure of the bushes.

The difference between our new design arms over the standard Nissan radius arm is the use of a Toyota-style rear bush.

This change allows increased life from the rear bush when flexing the arms up off-road, by allowing the arm to flex down without the binding found in the pin-style design.

With the arms, we supply the mounting drop boxes that are a straight bolt-in design requiring no cutting and all bolts needed for mounting.

We also supply fitting instructions and all the bushes are pressed into the arms so you donÂ’t have to.

With these arms, you will get the drivability you need and longer life from your bushes. Why not have extra flex as well as good on-road handling?

If you want to push the diff forward to straighten up your coils we offer the Hybrid Radius Arm Spacers.

NOTE: To fit Sway Bar Mounts you will require 85mm sway bar mounts and bushes. If you do not have sway bar mounts or you have 75mm mounts you can purchase the required ones below.

85mm Sway Bar Mount
Sway Bar Bushes to suit 85mm Mounts
  • Manufactured from High Tensile Bisalloy 80/Strenx700 Plate
  • High Tensile Bar Bush Eyes
  • Massive 32mm main Beam thickness for maximum strength
  • Rubber Bushes pre-fitted into arms
  • Laser-cut to precise measurement and caster location
  • Authentic Superior Engineering Logo machined into the side of Arms
  • Factory Sway bar will fit to allow safe on-road handling (see important note)
  • Factory ABS lines will bolt-on. (See important note)
  • RADIUS ARMS are manufactured Suitable For various lifts
  • Sandblasted with rust prevention applied
  • Powder Coated for maximum durability and finish
  • High Tensile Bisalloy 80/Strenx700 Plate will not crack unlike Cast Radius Arms(see image below for example)
  • Sway Bar Adapter plate bracket and bolts have a SA5 Zinc coating for rust prevention
  • Allows vehicle to track correctly on road due to correct caster
  • Maximum Clearance between the Tie Rod and the Radius Arms
  • Factory bushes fit the RADIUS ARMS; we donÂ’t use special sizes Bushes
  • Nissan Patrol GQ/GU

Best Sellers