Description

After testing a variety of shapes and pipe diameters here at Tomei R&D Lab, we found the optimum tuning point for the best performance balance. This design will extract the full capabilities from the EVO 10 4B11 engine. The design also retains the original layout to help with the ease of installation and compatibility for other exhaust parts.

Specifications

  • WIDE MOUTH - The smooth flowing design, without steps from the turbocharger. Manufactured with the lost wax process, combines both strength and beauty.
  • 3 INCH PIPE - After numerous tests, the 3 inches (76.3mm) greatly increases both power and torque.
  • TORQUE & POWER - Wide mouth & 3 inch piping. Achieve large power & torque gains over OEM. Direct bolt on that retains the original stock layout. Lost Wax casting process for maximum durability, precision without welds. Larger in size and diameter, smooth without any steps. The larger curve design makes it possible for a much larger capacity. Improved efficiency through with a more linear layout.
  • GOOD DESIGN FOR TOOLS - The wide mouth was designed to be easy to install with the general common work tools.
  • O2 SENSOR BOSS FOR AFR GAUGES - The mouting boss is an M18, which makes it easy to fit the AFR sensor. Comes with a blind plug to seal the hole when not in use.
  • FLEXIBLE PIPE DESIGN - Easy to install with minimal risks to cracking the stainless steel exhaust manifolds from vibrations.

What's Included

  • Outlet Component
  • Flange Nut M12 * P=1.25
  • Gasket (Turbo Side)
  • Sticker (Expreme)
  • Gasket (Catalyzer)
  • Bolt Smooth Paste
  • Clamp Band
  • Installation Manual
  • Blind Plug
  • Sticker (Tomei)
  • Copper Washer
  • Warranty Card
  • Stud Bolt M10-40 P=1.25 (Thread 12/26)
  • Titan Exhaust Bandage
  • Bandage Band

Compatibility

  • Mitsubishi EVO 10

After testing a variety of shapes and pipe diameters here at Tomei R&D Lab, we found the optimum tuning point for the best performance balance. This design will extract the full capabilities from the EVO 10 4B11 engine. The design also retains the original layout to help with the ease of installation and compatibility for other exhaust parts.

  • WIDE MOUTH - The smooth flowing design, without steps from the turbocharger. Manufactured with the lost wax process, combines both strength and beauty.
  • 3 INCH PIPE - After numerous tests, the 3 inches (76.3mm) greatly increases both power and torque.
  • TORQUE & POWER - Wide mouth & 3 inch piping. Achieve large power & torque gains over OEM. Direct bolt on that retains the original stock layout. Lost Wax casting process for maximum durability, precision without welds. Larger in size and diameter, smooth without any steps. The larger curve design makes it possible for a much larger capacity. Improved efficiency through with a more linear layout.
  • GOOD DESIGN FOR TOOLS - The wide mouth was designed to be easy to install with the general common work tools.
  • O2 SENSOR BOSS FOR AFR GAUGES - The mouting boss is an M18, which makes it easy to fit the AFR sensor. Comes with a blind plug to seal the hole when not in use.
  • FLEXIBLE PIPE DESIGN - Easy to install with minimal risks to cracking the stainless steel exhaust manifolds from vibrations.
  • Outlet Component
  • Flange Nut M12 * P=1.25
  • Gasket (Turbo Side)
  • Sticker (Expreme)
  • Gasket (Catalyzer)
  • Bolt Smooth Paste
  • Clamp Band
  • Installation Manual
  • Blind Plug
  • Sticker (Tomei)
  • Copper Washer
  • Warranty Card
  • Stud Bolt M10-40 P=1.25 (Thread 12/26)
  • Titan Exhaust Bandage
  • Bandage Band
  • Mitsubishi EVO 10

Best Sellers