Description

Notes: 26 piece press in/out tool kit

Most old and new suspension bushings are pressed in and out with old bearing shells, sockets or just anything you can find. This creates a safety issue, given that heat treated steel will shatter under stress. This creates a safety issue, given that heat treated steel will shatter under stress. The assortment of sleeves that make up the Nolathane Press Tool Kit are made from mild steel to allow distortion or crush when over-pressed. These newly designed tools provide an easy way to install and remove Nolathane polyurethane bushings and aid in other workshop pressing requirements.

Features:

  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

Specifications

Kit Contains;

  • 18 x sleeves - 28mm-113mm diameter (5mm increments)
  • 4 press plates
  • 4 pulling spindles covering following bolt sizes (M10,M12,M14,M16)
    • Rolled thread on spindles
    • Nuts with double washers and encapsulated lubricated ball bearings for strength and longevity (stops nut from binding and stripping thread)

Ideal for bearings, bushes, spherical joints or other applications. Can be used on workshop press or better yet on car simply and easily. Less force required to remove / install bushings, bearing and joints making use easy even without power tools

Download Installation Instructions

What's Included

  • 18 Tubes
  • 4 Stepped Plates
  • 4 Threaded Rods
  • 4 Spare Bearings
  • 8 Spare Bearing Plates

Compatibility

  • Universal Part

Notes: 26 piece press in/out tool kit

Most old and new suspension bushings are pressed in and out with old bearing shells, sockets or just anything you can find. This creates a safety issue, given that heat treated steel will shatter under stress. This creates a safety issue, given that heat treated steel will shatter under stress. The assortment of sleeves that make up the Nolathane Press Tool Kit are made from mild steel to allow distortion or crush when over-pressed. These newly designed tools provide an easy way to install and remove Nolathane polyurethane bushings and aid in other workshop pressing requirements.

Features:

  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

Kit Contains;

  • 18 x sleeves - 28mm-113mm diameter (5mm increments)
  • 4 press plates
  • 4 pulling spindles covering following bolt sizes (M10,M12,M14,M16)
    • Rolled thread on spindles
    • Nuts with double washers and encapsulated lubricated ball bearings for strength and longevity (stops nut from binding and stripping thread)

Ideal for bearings, bushes, spherical joints or other applications. Can be used on workshop press or better yet on car simply and easily. Less force required to remove / install bushings, bearing and joints making use easy even without power tools

  • 18 Tubes
  • 4 Stepped Plates
  • 4 Threaded Rods
  • 4 Spare Bearings
  • 8 Spare Bearing Plates
  • Universal Part

Best Sellers