Description

This kit includes new rotors, brake pads, and stainless steel brake lines to improve the braking performance of your vehicle.

FACTIONFAB SWEPT SLOT BI-DIRECTIONAL ROTOR PAIR FRONT

  • Front location
  • Shallow Sharp-edged groves are milled into a high carbon cast iron disc to provide consistent pad contact and maximum friction over repetitive use
  • High-carbon content for wear resistance, thermal stability, and cracking resistance
  • Bi-directional design, meaning rotors are not side specific
  • Symmetric vane castings to increase heat dissipation efficiency and thermal stability
  • Double-disc ground, non-directional finish
  • Mill balanced for reduced vibration
  • Precision machined with run-out spec of no more than .002?, Disc Thickness Variation (DTV) of .0005?
  • Fully machined non-friction surfaces for perfect fitment
  • Electronically applied E-coating for corrosion resistance
  • 400-hour salt spray tested
  • Fully coated inside and out

FACTIONFAB F-SPEC FRONT BRAKE PADS

  • Front location
  • Para-Aramid Composition
  • Ideal for auto-x, light track days, or aggressive street driving
  • 1300ºF maximum operating temperature to aid in fade resistance
  • Excellent modulation and initial bite
  • Pre-scorched compound to aid in cold weather modulation
  • O.E. gas slots and chamfers ensuring for safe efficient stopping while reducing noise associated with vibration
  • Positive molded technology provides safe and reliable stopping performance for the entire service life of the brake pad
  • Positive molded technology manufacturing process uses extreme pressure to compress the friction material and drives out any impurities or excess resins found in the brake pad
  • Precision cut backing plates ensure correct pad fitment in the caliper body eliminating vibrations and noise under braking
  • Mechanically attached application specific pad shims are designed to eliminate noise associated with brake pad vibrations
  • FACTIONFAB STAINLESS STEEL BRAKE LINES

    • Front location
    • PTFE Teflon inner liner to carry the fluid
    • Stainless steel woven middle layer for support of the inner liner
    • Abrasion-resistant, impact-resistant
    • Outer PCV clear abrasion resistant coating to aid in chaffing and protects the inner layers and stress relief at fitting locations
    • Each line is 4500psi burst pressure tested
    • Stainless steel precision machined fittings for perfect fit and corrosion resistance
    • Increased pedal feedback as a result of elimination of soft rubber lines which are prone to swelling and deforming
    • 100% model specific for perfect fitment
    • Includes hardware

    Specifications

    • Brake Pad Material: Para-aramid Composite
    • For Use With Stock Calipers: Yes
    • Location: Front
    • Recommended Use: Street/Track
    • Rotor Style: Slotted

    Compatibility

    • 2006 - 2007 Subaru Impreza WRX
    • 2006 - 2007 Subaru Impreza WRX Limited
    • 2006 - 2007 Subaru Impreza WRX TR

    This kit includes new rotors, brake pads, and stainless steel brake lines to improve the braking performance of your vehicle.

    FACTIONFAB SWEPT SLOT BI-DIRECTIONAL ROTOR PAIR FRONT

    • Front location
    • Shallow Sharp-edged groves are milled into a high carbon cast iron disc to provide consistent pad contact and maximum friction over repetitive use
    • High-carbon content for wear resistance, thermal stability, and cracking resistance
    • Bi-directional design, meaning rotors are not side specific
    • Symmetric vane castings to increase heat dissipation efficiency and thermal stability
    • Double-disc ground, non-directional finish
    • Mill balanced for reduced vibration
    • Precision machined with run-out spec of no more than .002?, Disc Thickness Variation (DTV) of .0005?
    • Fully machined non-friction surfaces for perfect fitment
    • Electronically applied E-coating for corrosion resistance
    • 400-hour salt spray tested
    • Fully coated inside and out

    FACTIONFAB F-SPEC FRONT BRAKE PADS

  • Front location
  • Para-Aramid Composition
  • Ideal for auto-x, light track days, or aggressive street driving
  • 1300ºF maximum operating temperature to aid in fade resistance
  • Excellent modulation and initial bite
  • Pre-scorched compound to aid in cold weather modulation
  • O.E. gas slots and chamfers ensuring for safe efficient stopping while reducing noise associated with vibration
  • Positive molded technology provides safe and reliable stopping performance for the entire service life of the brake pad
  • Positive molded technology manufacturing process uses extreme pressure to compress the friction material and drives out any impurities or excess resins found in the brake pad
  • Precision cut backing plates ensure correct pad fitment in the caliper body eliminating vibrations and noise under braking
  • Mechanically attached application specific pad shims are designed to eliminate noise associated with brake pad vibrations
  • FACTIONFAB STAINLESS STEEL BRAKE LINES

    • Front location
    • PTFE Teflon inner liner to carry the fluid
    • Stainless steel woven middle layer for support of the inner liner
    • Abrasion-resistant, impact-resistant
    • Outer PCV clear abrasion resistant coating to aid in chaffing and protects the inner layers and stress relief at fitting locations
    • Each line is 4500psi burst pressure tested
    • Stainless steel precision machined fittings for perfect fit and corrosion resistance
    • Increased pedal feedback as a result of elimination of soft rubber lines which are prone to swelling and deforming
    • 100% model specific for perfect fitment
    • Includes hardware
    • Brake Pad Material: Para-aramid Composite
    • For Use With Stock Calipers: Yes
    • Location: Front
    • Recommended Use: Street/Track
    • Rotor Style: Slotted
    • 2006 - 2007 Subaru Impreza WRX
    • 2006 - 2007 Subaru Impreza WRX Limited
    • 2006 - 2007 Subaru Impreza WRX TR

    Best Sellers