Description

Specifications

Motec | 14007 | Data Acquistion & Display

Inputs

  • 8 x analogue voltage inputs, 10 bit (4.9 mV) resolution 0 to 5 V, suitable for potentiometers, voltage output sensors and variable resistance (temperature) sensors
  • 8 x thermocouple inputs, 1 °C resolution suits K type thermocouples (-200 to 1250 °C)
  • 2 x cold junction compensation thermistor inputs
  • 4 x digital inputs with frequency measurement and switched capability
  • 2 x switch inputs
  • Update rate for all inputs 200 Hz, for a second expander 50 Hz

Outputs

  • 8 x PWM outputs
  • individually controllable for frequency and duty cycle.
  • 4 x adjustable duty cycle 0 to 100% in 255 steps and frequency range from 8 Hz to 5 kHz
  • 4 x adjustable duty cycle 0 to 100% in 20 steps and frequency range from 1 Hz to 100 Hz

Communications

  • CAN bus used for communicating to the data acquisition, display or ECU and to the PC during calibration and firmware upgrades

Configuration

  • Configured as part of the configuration for the connected ECU or data logger.
  • Physical
  • Case size 99 x 105 x 40 mm
  • Weight - 310 gram

Connectors 

  • two part 60 pin waterproof connector with gold plated contacts

Compatibility

  • Universal Part

Motec | 14007 | Data Acquistion & Display

Inputs

  • 8 x analogue voltage inputs, 10 bit (4.9 mV) resolution 0 to 5 V, suitable for potentiometers, voltage output sensors and variable resistance (temperature) sensors
  • 8 x thermocouple inputs, 1 °C resolution suits K type thermocouples (-200 to 1250 °C)
  • 2 x cold junction compensation thermistor inputs
  • 4 x digital inputs with frequency measurement and switched capability
  • 2 x switch inputs
  • Update rate for all inputs 200 Hz, for a second expander 50 Hz

Outputs

  • 8 x PWM outputs
  • individually controllable for frequency and duty cycle.
  • 4 x adjustable duty cycle 0 to 100% in 255 steps and frequency range from 8 Hz to 5 kHz
  • 4 x adjustable duty cycle 0 to 100% in 20 steps and frequency range from 1 Hz to 100 Hz

Communications

  • CAN bus used for communicating to the data acquisition, display or ECU and to the PC during calibration and firmware upgrades

Configuration

  • Configured as part of the configuration for the connected ECU or data logger.
  • Physical
  • Case size 99 x 105 x 40 mm
  • Weight - 310 gram

Connectors 

  • two part 60 pin waterproof connector with gold plated contacts
  • Universal Part

Best Sellers