Description

Large Three Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use.

Unique One-Piece Housing: The included performance air filter is surrounded by an open-element cross-link polyethylene (XLPE) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed. It connects to the vehicle’s factory air inlet with no additional hardware.

Dyno Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable.

Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system.

Note: Fits both active and non-active steering.

Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Specifications

  • Outflows Factory Intake by 67%
  • Measured Flow: 460 CFM @ 7” H20
  • Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
  • Open-Element Design Allows for Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
  • Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
  • Connects to the Factory Air Inlet Scoop with No Additional Hardware

Compatibility

  • 2008-2013 BMW 128i (E82/E88) N52 Engine L6 3.0L Gas
  • 2006-2006 BMW 325i (E90) N52 Engine L6 3.0L Gas
  • 2006-2006 BMW 325xi (E90/E91) N52 Engine L6 3.0L Gas
  • 2007-2011 BMW 328i (E90) N52 Engine L6 3.0L Gas
  • 2007-2012 BMW 328i (E91) N52 Engine L6 3.0L Gas
  • 2007-2013 BMW 328i (E92/E93) N52 Engine L6 3.0L Gas
  • 2009-2011 BMW 328i xDrive (E90) N52 Engine L6 3.0L Gas
  • 2009-2012 BMW 328i xDrive (E91) N52 Engine L6 3.0L Gas
  • 2009-2013 BMW 328i xDrive (E92) N52 Engine L6 3.0L Gas
  • 2007-2008 BMW 328xi (E90/E91/E92) N52 Engine L6 3.0L Gas
  • 2006-2006 BMW 330i (E90) N52 Engine L6 3.0L Gas
  • 2006-2006 BMW 330xi (E90) N52 Engine L6 3.0L Gas

Large Three Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use.

Unique One-Piece Housing: The included performance air filter is surrounded by an open-element cross-link polyethylene (XLPE) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed. It connects to the vehicle’s factory air inlet with no additional hardware.

Dyno Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable.

Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system.

Note: Fits both active and non-active steering.

Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

  • Outflows Factory Intake by 67%
  • Measured Flow: 460 CFM @ 7” H20
  • Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
  • Open-Element Design Allows for Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
  • Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
  • Connects to the Factory Air Inlet Scoop with No Additional Hardware
  • 2008-2013 BMW 128i (E82/E88) N52 Engine L6 3.0L Gas
  • 2006-2006 BMW 325i (E90) N52 Engine L6 3.0L Gas
  • 2006-2006 BMW 325xi (E90/E91) N52 Engine L6 3.0L Gas
  • 2007-2011 BMW 328i (E90) N52 Engine L6 3.0L Gas
  • 2007-2012 BMW 328i (E91) N52 Engine L6 3.0L Gas
  • 2007-2013 BMW 328i (E92/E93) N52 Engine L6 3.0L Gas
  • 2009-2011 BMW 328i xDrive (E90) N52 Engine L6 3.0L Gas
  • 2009-2012 BMW 328i xDrive (E91) N52 Engine L6 3.0L Gas
  • 2009-2013 BMW 328i xDrive (E92) N52 Engine L6 3.0L Gas
  • 2007-2008 BMW 328xi (E90/E91/E92) N52 Engine L6 3.0L Gas
  • 2006-2006 BMW 330i (E90) N52 Engine L6 3.0L Gas
  • 2006-2006 BMW 330xi (E90) N52 Engine L6 3.0L Gas

Best Sellers