Description

The AMS EVO X MR/Ralliart SST Transmission oil cooler kit is the first of its kind for the SST transmission. Many SST owners know all too well the problems plagued with the 6 speed dual clutch automatic transmission in the EVO X MR and Ralliart. Overheating is a common occurrence when driven hard. The AMS Trans. cooler helps to prevent that by using a high quality larger capacity heat exchanger with a fan that pulls air through the core the entire time the car is running. This helps to keep transmission temperatures in check and keep that pesky “slow down” light on the dash from coming on so often.

Features

  • Full time fan to constantly pull in air through the cooler
  • Directly replaces the OEM cooler, no cutting or modifying OEM plastics or body panels
  • High quality oil cooler that adds an extra ½ quart of fluid capacity
  • Large frontal area of core allows for even better cooling

Due to the size of the transmission cooler being much larger than stock most aftermarket lower intercooler pipes will not fit, including the AMS lower intercooler pipe. This kit is made to fit with the stock intercooler pipe.

Specifications

  • Oil cooler capable of holding .5 additional quarts
  • High quality 8” fan with stainless steel shroud
  • 100% Stainless steel brackets
  • Aeroquip push-lock fitting for OEM hose integration

What's Included

  • (1) Cooler w/ Fan Attached
  • (2) Thin Spacers
  • (2) Thick Spacers
  • (2) M8x1.25 30mm Bolts w/ Washers 2 – M6x1 20mm Bolts w/ Washers
  • (2) M6x1 12mm Bolts w/ Washers
  • (2) M6 Nuts
  • (2) Hose Clamps
  • (1) 6” Piece of Red 16G wire w/Connector 1 – 28” Piece of Wire Loom
  • (1) Wire Butt Connector
  • (1) 120 Degree -8 Fitting
  • (1) 45 Degree -8 Fitting

Compatibility

  • 2007+ Mitsubishi Lancer Evo X MR (SST)
  • 2007+ Mitsubishi Ralliart Lander (SST)

The AMS EVO X MR/Ralliart SST Transmission oil cooler kit is the first of its kind for the SST transmission. Many SST owners know all too well the problems plagued with the 6 speed dual clutch automatic transmission in the EVO X MR and Ralliart. Overheating is a common occurrence when driven hard. The AMS Trans. cooler helps to prevent that by using a high quality larger capacity heat exchanger with a fan that pulls air through the core the entire time the car is running. This helps to keep transmission temperatures in check and keep that pesky “slow down” light on the dash from coming on so often.

Features

  • Full time fan to constantly pull in air through the cooler
  • Directly replaces the OEM cooler, no cutting or modifying OEM plastics or body panels
  • High quality oil cooler that adds an extra ½ quart of fluid capacity
  • Large frontal area of core allows for even better cooling

Due to the size of the transmission cooler being much larger than stock most aftermarket lower intercooler pipes will not fit, including the AMS lower intercooler pipe. This kit is made to fit with the stock intercooler pipe.

  • Oil cooler capable of holding .5 additional quarts
  • High quality 8” fan with stainless steel shroud
  • 100% Stainless steel brackets
  • Aeroquip push-lock fitting for OEM hose integration
  • (1) Cooler w/ Fan Attached
  • (2) Thin Spacers
  • (2) Thick Spacers
  • (2) M8x1.25 30mm Bolts w/ Washers 2 – M6x1 20mm Bolts w/ Washers
  • (2) M6x1 12mm Bolts w/ Washers
  • (2) M6 Nuts
  • (2) Hose Clamps
  • (1) 6” Piece of Red 16G wire w/Connector 1 – 28” Piece of Wire Loom
  • (1) Wire Butt Connector
  • (1) 120 Degree -8 Fitting
  • (1) 45 Degree -8 Fitting
  • 2007+ Mitsubishi Lancer Evo X MR (SST)
  • 2007+ Mitsubishi Ralliart Lander (SST)

Best Sellers